VAT SECURITY WIRING FOR 1991 OLDSMOBILE
TRANSPONDERY | GM VATS PASS KEY SYSTEM DESCRIPTION
VATS ( Vehicle Anti Theft System ), also known as PASS-Key ( Personal Automotive Security System ) 1991-1996: Oldsmobile 88: 1992-1999: The system itself operates on a very simple principal. In addition to the standard side-bar ignition, there is a resistor embedded into the key. When the key is inserted into the lock and turned, anGuides Instructions · Transponder Catalog
Easy way to bypass VATS without fumbling wires? : 1992-1999
Dec 04, 2013The easiest way is to remove the C101 connector, it's the big one at the base of the steering column. Both vats wire go into this connector. Remove the 2 vats leads from the column side of the connector and jumper with a resistor that matches your key. The wire on the right is the vats wire, orange sheathing with 2 white wires inside.
VATS and PASSKey Vehicle Anti-Theft Systems - ThirdGen
The VATS decoder module is located beneath the dash in the LH foot well, near the kick panel. The VATS decoder module has sixteen connector pins, but uses only eight wires: An orange wire from B+ for a constant 12VDC to pin B8; A purple/white and a white/black wire from the key contacts; A pink/black wire from the ECM/IGN power fuse to pin A1
PERMANENTLY Disable and Remove GM Security Systems
VATS, Passkey or Passlock – are the core of GM security systems, have a short lifespan and they’re certainly more effective at keeping you from DRIVING your car than keeping someone from STEALING your car! GM Security Systems are killing cars all over North America and the only final solution is to disable and remove them permanently.
The only GM VATS Bypass module that bypasses in FULL!
I rolled up my sleeves and took out the VATS security system – then I spent the weekend probing it in every possible way to figure out a way to remove it permanently from my car. MY car! Not GM’s car, not the dealer’s car. I wanted to be free. It really wasn’t all that difficult to outsmart the GM security system.[PDF]
GM Vehicle Theft Deterrent (VTD) Relearn Procedures
Security light should turn on and stay on. 3. Wait for 10 minutes or until the security light turns off. 4. Turn key to the “OFF” position for 5 seconds. 5. Turn key to the “ON” position without starting the engine. Security light should turn on and stay on. 6. Wait for 10 minutes or until the security light turns off. 7.